Restoration of the fire and damaged properties to their original condition before the loss due to the destruction caused by the fire, cleaning, and restoration may take months or even weeks. Restoration after a fire involves property boards demolition and reconstruction over the rubble and smell and soot removal, washing of the interior of the property, and elimination of any potential risks such as asbestos, lead, and asbestos.
How To Restore a Fire Damage
The fire damage repair contractor must first obtain authorization from an authorized body before they are allowed to enter the property to assess the extent of the fire damage. This is because contractors could otherwise be in an unsafe circumstance and could be injured.
Here’s how the restoration process typically progresses following they are allowed to access the property:
Fire damage professionals will assess the damage caused through the flames and subsequent water intrusions after confirming that it’s appropriate to go into the structure. This typically involves determining the extent to which fire and smoke can penetrate the structure and the extent of any cleanup. The process also includes an examination of the house’s contents to determine what must be removed and what can be repaired. For other details, see here to learn more about property restoration.
After an in-depth assessment, the restoration company can better understand the scope of the project and the time the project will last and can estimate the cost.
Property Security and Debris Removal
After the evaluation following the assessment, the property should be secured. This means putting up an enclosure around the property and cleaning up areas, closing the holes in the building, and sealing or tarping areas on the roofing if the fire did not impact specific areas. If that is the situation, the smoke damage remediation experts must ensure that the zone is kept separate from the affected area to avoid cross-contamination.
Water Mitigation, Demolition, and Dry Out
This phase aims to remove the water and dry the structure to avoid further corrosion or mold damage. Personal possessions are taken from the interior of the building. Suppose necessarily damaged flooring, drywall, and other materials will be taken away to the studs. Water removal teams will utilize industrial equipment for drying the structure. Roof tarps are used during this time to stop further water intrusion.
Cleaning and Smoke Elimination
Cleaning up is the longest-running part of a fire damage restoration project. It usually involves lots of manual labor to clear smoke and soot off the interior and exterior surfaces on time. In most cases, each square inch of the affected area has to be scrubbed. After a thorough cleaning, Deodorizing agents eliminate any remaining smoke odors.
If restoration of water damage was performed, cleaning or using antimicrobial chemicals could be necessary to stop any further growth of mold. The contents that are removed will likely be restored to their pre-loss state. Cleaning includes the removal of any smoke, soot, or dust that may have built up within the air ducts. For more information about restoration services, you can do a quick search for Puroclean near you.
Construction & Restoration
The final step to bring the property back to its pre-loss condition is to fix any damage caused by fire or rebuild areas damaged by fire. For instance, during the initial fire evaluation, some areas of the structure could be unsalvageable and have to be removed and replaced. This could include the reconstruction and the ceiling and electrical wiring, drywall flooring, countertops for the interior, and fixtures and fixtures to return the property to its previous state before the loss.